|Model !||A55 !||A60 !||R !||P !||A !||Lb !||wPvc !||wPp !|
|PT59||17.10 m²/m³||14.91 m²/m³||2.20 cm||410 mm||9030 mm²||59 mm +Th||32 kg/m³||21 kg/m³|
There are 4 different PT series lamella models. PT series is a interlock system, profiles are locked with each other.
The whole pool is filled in this way. PT series lamella made of PVC or PP is used to obtain clear water and wastewater in the clarifier basins.
It is smooth, flexible and strong. The sediment which is accumulated in the honeycomb cell falls on the ground on its own. Therefore, it does not need further cleaning.
While efficiency is increased in the pools where Lamellas are used, structural pool volume, chemical, and energy consumption decrease.
It's assembling and maintinance are simple and easy. Because of all the mentioned features, the lamella system takes place among the best-known solution at the moment.
Lamella width (W): Standard production is 165 mm. The clarifier is filled to be multiples of 165 mm.
Lamella length (LA): It can be made in every size.
In projects H: It is given as vertical height. Usually, the vertical (H) height is between 1000-1200 mm.
Lamella Slope (SA): It ranges between 55 to 60 degrees. In most cases, 60 degrees is recommended.
Standard thickness (Th): The standard thickness for PVC and PP is 1 mm.
Standard color : For PVC, Black color is produced. For PP, its translucent white. Other desired colors can be produced upon request.
Operating temperature : 50 degrees for PVC. 60 degrees for translucent PP.
Application Type; Interlocking Type: The interlock lamella system can be installed on-site, inside the pool (basin). PT series lamella is easy to install (2-4 m3 / person-hour).
We can be the solution; Please feel free to request technical support on Lamella related issues.
As its our full time job to make the lamella system, we will definitely answer all the questions which are in your mind and we will suggest you a better solution. Request information