PT79 MODEL TUBE SETTLER & LAMELLA
Home CT44 CT48 CT52 CT54 CT60 CT68 ET56 PT49 PT59 PT69 PT79 Sheet Unit Block Framed



Model     !A55     !A60     ! R     ! P     ! A     ! Lb     ! wPvc ! wPp     !
PT7912.98 m/m 11.32 m/m2.75 cm470 mm12920 mm 79 mm +Th 24 kg/m 16 kg/m

PT79 Model Interlock Type Tube settlers

There are 4 different PT series lamella models. PT series is ainterlock system, profiles are locked with each other.

The whole pool is filled in this way.PT series lamella made of PVC or PP is used to obtain clear water and wastewater in the clarifier basins.
It is smooth, flexible and strong. The sediment accumulated in the honeycomb cell falls on the ground on its own and, therefore it does not need cleaning.
While efficiency is increased in lamellas used pools, structural pool volume, chemical, and energy consumption decrease.
It is easy to assemble and service. Because of these features, the lamella system is the best-known solution at the moment

General information; Lamella width (W): Standard production is 180 mm. The clarifier is filled to be multiples of 180 mm.
Lamella length (LA): It can be made in every size.
In projects H: It is given as vertical height. Usually, the vertical (H) height is between 1000-1200 mm.
Lamella Slope (SA): It is 55-60 degrees. 60 degrees is recommended.
Standard thickness (Th): 1 mm for PVC and PP.
Standard color : Black is for PVC. Translucent white for PP. Other color can be made upon request.
Operating temperature : 50 degre for PVC. Translucent 60 degre for PP.

Application Type; Interlocking Type: The interlock lamella system can be installed on-site, inside the pool (basin). PT series lamella is easy to install (2-4 m3 / person-hour).

We can be the solution; Please feel free to request technical support on Lamella related issues.
We only make the lamella system, we will definitely suggest a better solution. Request information

www.tubesettler.com Project Help Tube settler & Frame Calculator Products Contact